SUMMARY DESCRIPTION
■ Dual bank Flash memories
   – Concurrent operation, read from memory while erasing and writing the other. In-Application Programming (IAP) for remote updates
   – Large 128KByte or 256KByte main Flash memory for application code, operating sys tems, or bit maps for graphic user interfaces
   – Large 32KByte secondary Flash memory di vided in small sectors. Eliminate external EE PROM with software EEPROM emulation
   – Secondary Flash memory is large enough for sophisticated communication protocol (USB) during IAP while continuing critical system tasks
■ Large SRAM with battery back-up option
   – 32KByte SRAM for RTOS, high-level languages, communication buffers, and stacks
■ Programmable Decode PLD for flexible address mapping of all memories
   – Place individual Flash and SRAM sectors on any address boundary
   – Built-in page register breaks restrictive 8032 limit of 64KByte address space
   – Special register swaps Flash memory segments between 8032 “program” space and “data” space for efficient In-Application Programming
■ High-speed clock standard 8032 core (12-cycle)
   – 40MHz operation at 5V, 24MHz at 3.3V
   – 2 UARTs with independent baud rate, three 16-bit Timer/Counters and two External Interrupts
■ USB Interface (some devices only)
   – Supports USB 1.1 Slow Mode (1.5Mbit/s)
   – Control endpoint 0 and interrupt endpoints 1 and 2
■ I2C interface for peripheral connections
   – Capable of master or slave operation
■ 5 Pulse Width Modulator (PWM) channels
   – Four 8-bit PWM units
   – One 8-bit PWM unit with programmable period
■ 4-channel, 8-bit Analog-to-Digital Converter (ADC) with analog supply voltage (VREF)
■ Standalone Display Data Channel (DDC)
   – For use in monitor, projector, and TV applications
   – Compliant with VESA standards DDC1 and DDC2B
   – Eliminate external DDC PROM
■ Six I/O ports with up to 50 I/O pins
   – Multifunction I/O: GPIO, DDC, I2C, PWM, PLD I/O, supervisor, and JTAG
   – Eliminates need for external latches and logic
■ 3000 gate PLD with 16 macrocells
   – Create glue logic, state machines, delays, etc.
   – Eliminate external PALs, PLDs, and 74HCxx
   – Simple PSDsoft Express software ...Free
■ Supervisor functions
   – Generates reset upon low voltage or watch dog time-out. Eliminate external supervisor device
   – RESET Input pin; Reset output via PLD
■ In-System Programming (ISP) via JTAG
   – Program entire chip in 10 - 25 seconds with no involvement of 8032
   – Allows efficient manufacturing, easy product testing, and Just-In-Time inventory
   – Eliminate sockets and pre-programmed parts
   – Program with FlashLINKTM cable and any PC
■ Content Security
   – Programmable Security Bit blocks access of device programmers and readers
■ Zero-Power Technology
   – Memories and PLD automatically reach standby current between input changes
■ Packages
   – 52-pin TQFP
   – 80-pin TQFP: allows access to 8032 address/data/control signals for connecting to external peripherals