General Description
The AOZ2152TQI-19 is a high-efficiency, easy-to-use
DC/DC synchronous buck regulator that operates up to
28V. The device is capable of supplying 6A of continuous
output current with an output voltage adjustable down to
4V to 7.5V.
The AOZ2152TQI-19 integrates an internal linear
regulator to generate 5.3V VCC from input. If input
voltage is lower than 5.3V, the linear regulator operates
at low drop output mode, which allows the VCC voltage is
equal to input voltage minus the drop-output voltage of
the internal linear regulator.
A proprietary constant on-time PWM control with input
feed-forward results in ultra-fast transient response while
maintaining relatively constant switching frequency over
the entire input voltage range.
The device features multiple protection functions such as
VCC under-voltage lockout, cycle-by-cycle current limit,
output over-voltage protection, short-circuit protection,
and thermal shutdown.
The AOZ2152TQI-19 is available in a 3mm×3mm QFN-
18L package and is rated over a -40°C to +85°C ambient
temperature range.

Features
 Wide input voltage range
– 6.5V to 28V
 6A continuous output current
 Output voltage adjustable down to 4V to 7.5V
 Low RDS(ON) internal NFETs
– 28m high-side
– 11m low-side
 Constant On-Time with input feed-forward
 Ceramic capacitor stable
 Adjustable soft start
 Power Good output
 Integrated bootstrap diode
 Cycle-by-cycle current limit
 Short-circuit protection
 Thermal shutdown
 Force PWM operation
 Thermally enhanced 3mm x 3mm QFN-18L package

Applications
 Compact desktop PCs
 Graphics cards
 Set-top boxes
 LCD TVs
 Cable modems
 Point-of-load DC/DC converters
 Telecom/Networking/Datacom equipment