Features
▪ Single 1.7 V - 2.0 V Supply
▪ 64-Mbit (8 x 8 Mbit) Flash Memory
▪ Serial Peripheral Interface (SPI) and Quad Peripheral Interface (QPI) compatible
• Supports SPI Modes 0 and 3
• Supports Dual Output Read and Quad I/O program and read
• Supports QPI program and read
• 133 MHz maximum operating frequency
• Clock-to-Output (tV1) of 6 ns
• Up tp 66 MB/s continuous data transfer rate
▪ Quad enabled (factory default setting: see Section 7.7)
▪ Full chip erase
▪ Flexible, optimized erase architecture for code and data storage applications
• 0.6 ms typical Page Program (256 Bytes) time
• 60 ms typical 4-kByte Block Erase time
• 200 ms typical 32-kByte Block Erase time
• 350 ms typical 64-kByte Block Erase time
▪ Hardware controlled locking of Status registers via WP pin
▪ 4-kbit secured One-Time Programmable (OTP) security register
▪ Hardware write protection
▪ Serial Flash Discoverable Parameters (SFDP) register
▪ Flexible programming
• Byte/page program (1 to 256 Bytes)
• Dual or quad input byte/page program (1 to 256 Bytes)
▪ Erase/program suspend and resume
▪ JEDEC standard manufacturer and device ID read methodology
▪ Low power dissipation
• 2 µA Deep Power-Down (DPD) current (typical)
• 10 µA Standby current (typical)
• 5 mA Active read current (typical)
▪ Endurance: 100,000 program/erase cycles (4-kB, 32-kB, or 64-kB blocks)
▪ Data Retention: 20 years
▪ Industrial temperature range: -40 °C to +85 °C
▪ Industry standard green (Pb/Halide-free/RoHS compliant) package options
• 8-pad DFN (6 x 5 x 0.6 mm)
• 8-ball WLCSP (dBGA)