FEATURES
• Dual voltage monitoring
• Active low reset outputs
• Two standard reset threshold voltages
—Factory programmable threshold
• Lowline Output — zero delayed POR
• Reset signal valid to VCC = 1V
• System battery switch-over circuitry
• Selectable watchdog timer
—(0.15s, 0.4s, 0.8s, off)
• 256Kbits of EEPROM
• Built-in inadvertent write protection
—Power-up/power-down protection circuitry
—Protect 0, 1/4, 1/2 or all of EEPROM array with
programmable Block Lock™ protection
—In circuit programmable ROM mode
• Minimize EEPROM programming time
—64 byte page write mode
—Self-timed write cycle
—5ms write cycle time (typical)
• 400kHz 2-wire Interface
• 2.7V to 5.5V power supply operation
• Available package — 20-lead TSSOP