Features
Type-C with Non MCU-based PD and WaterDetection
. Super Speed Polarity Indicator
3:1 MUX Switches with Built-in BC1.2 Scheme
and TA Hiccup control
Max. 3.5 A Switch-Mode Charger with Dual-outputand Embedded QC2.0 Protocol
Programmable Charge Parameters via I2C
. Fast-Charge Current. Top-Off (end of charge). Battery Floating (regulation) Voltage. Trickle-Charge Current. Adaptive-Input Current Limit (AICL)
. VBUS Input Current Limit
Fuel Gauge with Flexibility in Current SensingResistor
. External High-Side Current Sensing
. 5 mΩ or 2 mΩ Selectable Sensing Resistor
A nVBUSPOK pin for Touch Sensor
1.5 A Flash LED Driver
Protections
. Thermal Protection
. Thermal Regulation. VBUS Overvoltage Protection
. Battery Overvoltage Protection
. VSYS OVP
. Discharge Overcurrent Protection
. Charger Safety Timers
. Reverse Leakage Blocking
. Charger = Off (or PWM = OFF) in DP / DM OVP
. CC1, CC2 Overvoltage Protection
. SBU1, SBU2 Overvoltage Protection
. Water Detection with 8-bit ADC
. DP_CON / DM_CON Short Detection
Ship Mode to Minimize Leakage Current duringSystem OFF
Up to 400kHz Full-Speed I2C Interface
81-Bump, 3.72 mm x 3.72 mm WLCSP Package

Applications
Mobile and Smart Phones
Tablets
Portable Devices