GENERAL DESCRIPTION
The MA280 is an integrated hall sensor with output drivers, mainly designed for
electronic commutation of brush-less DC Fan. This IC is using HV BCD process internally
includes the regulator, protecting diode, Hall plate, amplifier, comparator, and a pair of
complementary open-Drain outputs (DO, DOB).
While the magnetic flux density (B) is larger than operate point (Bop), DO will turn on
(low), and meanwhile DOB will turn off (high). Each output is latched until B is lower than
release point (Brp), and then DO, DOB transfer each state. For DC fan application,
sometimes need to test power reverse connection condition. Internal diode only protects
chip-side but not for coil-side. If necessary, add one external diode to block the reverse
current from coil-side.

 FEATURES
- On-Chip Hall Effect Sensor with Two Different Sensitivity and Hysteresis Settings
- Wide Operating Voltage Range: 4.0V~20V
- Output Sink Current up to 0.4A
- Built-in FG Output
- -40°C to 85°C Operating Temperature
- Low Profile SOT23-6F Package ( Green and Lead Free )