Features
The SB4 Snappable PC BreadBoard is great
for a small project, or four tiny projects. It can
be used as a single prototyping board, or it can
be snapped into two or four smaller boards. It is
scored in two places along the middle to make
snapping into smaller pieces easy. The SB4 is a
solderable breadboard, so the soldered
components are permanently attached making a
rugged prototype.
Two of the boards have 4-hole strips, which
are good for IC circuits. Two of the boards have
2-holes strips that are good for higher density
circuits (and they can be joined if needed for longer ICs strips).
Each of the four smaller boards has two
power rails. There are bonus two-hole pads
along the centerline allowing DIL (dual in-line)
headers to be used (some boards leave that area
empty). A top-side silkscreen helps to position
components.
BPS prototyping boards use high-quality
FR4 glass epoxy PCBs for long life. An antitarnish
coating protects the copper for a long
shelf-life and provides easy soldering. BPS
boards are lead-free and RoHS compatible.