Features
 Xmod form-factor
- Supported base slots: 6 x 2, 8 x 4, 10 x 6, 12 x 8, 5 x 2, 5 x 3
- Size: 20 x 25 mm
- M3 mounting hole
 FT2232H
- Channel B RX/TX LED's (on top, not visible from front)
- Mini USB connector (more rigid then micro USB)
- 93C56 EEPROM
 Lattice XO2-256 CPLD
- On-board programmable using Lattice tools
- 8 universal I/O pins
- VCCIO either 3.3 V or user supplied (1.8 to 3.3V)
- Red user LED (front visible)
- 12 MHz clock from on-board Oscillator
 Step down DC DC Converter for optional power supply via USB-Power
 Green Power-on LED (front visible)
 User button (front accessible)
 4 position DIP switch
- Choose CPLD program mode
- FTDI EEPROM disable (not implemented in PCB REV 1)
- Use VIO same as VCC
- Use VCC from USB