General Description
The SY88933AL high-sensitivity limiting post amplifier is designed for use in fiber-optic receivers. The device connects to typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time. The SY88933AL quantizes these signals and outputs PECL level waveforms.

Features
• Single 3.3V power supply
• DC-to-1.25Gbps operation
• Low-noise PECL data outputs
• High gain SD
• Chatter-free open-collector TTL signal detect (SD) output with internal 4.75kΩ pull-up resistor
• TTL EN input
• Programmable SD level set (SDLVL)
• Available in a tiny 10-pin MSOP package
• Pin-compatible with SY88933V

Applications
• GPON/BPON/EPON/GEPON
• Gigabit Ethernet
• 531Mbps and 1062Mbps Fibre Channel
• OC-3 and OC-12 SONET/SDH
• High-gain line driver and line receiver
• Low-gain TIA interface