NOTES:
_
x Average of conversion loss at center of mid-band frequency (fL+fU /4)
σ Standard deviation
o Non-hermetic
t When ordering, specify BNC or SMA connectors.
* L=50-100 MHz; M=100-500 MHz
** Below 10 MHz IF, conversion loss increase up to 6 dB higher as frequency decreases to DC.
*** Above 750 MHz IF, conversion loss increases up to 9.8 dB max.
A. General Quality Control Procedures, Environmental Specifications, Hi-Rel and MIL description are given in General Information (Section 0).
B. Connector types and case mounted options, case finishes are given in section 0, see “Case Styles & Outline Drawings”.
C. Prices and Specifications subject to change without notice.
1. Absolute maximum power, voltage and current ratings: 1a. RF power 50mW; 1b. Peak IF current, 40mA