1. General description
The 74HC4016 is a quad single pole, single throw analog switch. Each switch features
two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is
LOW, the analog switch is turned off. Inputs include clamp diodes. This enables the use of
current limiting resistors to interface inputs to voltages in excess of VCC.
2. Features and benefits
 Input levels nE inputs:
 For 74HC4016: CMOS level
 Typical ‘break before make’ built-in
 Low ON resistance:
 160  (typical) at VCC = 4.5 V
 120  (typical) at VCC = 6.0 V
 85  (typical) at VCC = 9.0 V
 Specified in compliance with JEDEC standard no. 7A
 ESD protection:
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-A exceeds 200 V
 Specified from 40 C to +85 C and 40 C to +125 C