PRODUCT DESCRIPTION
The CS-425-HC products are solid-state current
switches with N.O. triac outputs to control highcurrent
line-voltage AC loads. All models have a
factory set trip level of approximately 1 Amp and
require no field adjustment for easy installation.
Internal circuits are powered by induction from
the line being monitored and all models are cULu
certified.
The CS-425-HC series can operate a dryer booster
fan directly. These devices sense when a clothes
dryer is drawing 1 Amp of current and then closes
the output switch to activate the dryer vent booster
fan. When the dryer cycle is complete and the
current drops below the threshold, the output
switch will remain closed for a pre-set delay time
to allow heat to be removed from the vent before
the switch is opened again. The device output can
switch 120 Vac loads up to 2.5 Amps.