Description
Nano Every is a miniature sized module containing an ATMega4809 AVR processor and an ATSAMD11D14A ARM Cortex M0+ processor
to act as a bridge between USB and the main AVR processor. The module can either be mounted as a DIP component (when mounting
pin headers), or as a SMT component, directly soldering it via the castellated pads.

Features
ATMega4809
Processor
AVR CPU at up to 20 MHz
48KB Flash
6KB SRAM
256B EEPROM
Power On Reset (POR) and Brown Out Detection (BOD)
Peripherals
1x 16-bit Timer/Counter with a dedicated period register and 3x compare channels
4x 16-bit Timer/Counter with input capture
1x 16-bit Real-Time Counter (RTC) running from an external crystal or an internal RC oscillator
4x USART with fractional baud rate generator, auto-baud, and start-of-frame detection
1x Master/slave Serial Peripheral Interface (SPI)
1x Dual mode Master/Slave TWI with dual address match 6x 16 bit Timers (1 dedicated to RTC)
Event System for CPU independent and predictable inter-peripheral signaling
Configurable Custom Logic (CCL) with up to four programmable Look-up Tables (LUT)
1x Analog Comparator (AC) with a scalable reference input
Watchdog Timer with Window mode, with separate on-chip oscillator
External interrupt on all general purpose pins
ATSAMD11D14A
Processor
ARM Cortex M0+ at up to 48 MHz
16KB Flash
4KB SRAM
Power On Reset (POR) and Brown Out Detection (BOD)
One full-speed (12Mbps) Universal Serial Bus (USB) 2.0 interface
Embedded device function
Eight endpoints
Standard firmware for USB-UART bridge
Can be reprogrammed for other USB classes
UART connection to ATMega4809
Field upgradeable through USB Bootloader
MPM3610 (DC-DC)
Regulates input voltage from up to 21V with a minimum of 65% efficiency @minimum load
More than 85% efficiency @12V
AP2112K-3,3 (LDO)
Regulates input voltage from 5V to 3.3V
Up to 550mA output current for user application (recommended max 200mA)