MATERIAL SELECTION GUIDE
High Performance Elastomer -75°C to +150°C. Semi-rigid high performance elastomer
combines excellent resistance to fuels, oils and solvents with superior performance at
extreme temperatures. Material meets the requirements of VG95343 Type 6, BSG 198-5-
DE, EN62329-102 and SAE AS5258 Type H. These boots are recommended for demanding
applications such as military vehicles and petrochemical exploration.
Zero Halogen Polyolefin -30°C to +135°C. Low Smoke Zero Halogen (LSZH) polyolefin
boots meet low smoke and toxicity requirements of shipboard, transit and aircraft systems.
Oxygen index greater than 30%, smoke index less than 20, and toxicity index under 3 per
100 grams. Material meets requirements of NAVSEA 5617649, VG95343 Part 29, BSG 198-
5-DF, EN62329-101 and SAE AS5258 Type G. Good resistance to oils, fuels and solvents.
PRE-COATED ADHESIVE SELECTION GUIDE
Low Smoke Zero halogen (LSZH) polyamide hot melt adhesive Coating. Bonds well
to a variety of substrates. Good creep resistance at elevated temperatures. Excellent
bond strength at low temperature. Good resistance to fuels and oils. -55°C to +125°C.
Compatible with Type 1 and Type 2 boot materials.
High Temperature Epoxy Adhesive Coating. Glenair’s highest performance pre-coated
adhesive. The material requires careful installation using trained operators. -75°C to 150°C.
Withstands prolonged high temperature immersion in fuels and oils. Excellent peel adhesion on a wide range of materials. Compatible with Type 1 boot material only.