Feature
 Input range: 3.8V - 6V for USB input 2.7V - 4.5V for BAT input
 Switch mode Li-ion battery charger providing charging current up to 3A.
 Power path controller with 5A current path.
 Accurate battery fuel gauge.
 Real time clock RTC
 Low standby current of less than 40uA (at 32KHz clock frequency)
 2MHz switching frequency for the buck converters
 1MHz switching frequency for the boost converter
 Fast transient response due to the current mode architecture
 Internal frequency compensation and soft start
 Programmable output voltage and power up/down sequence through I2C interface
 Proprietary circuit architecture achieving high efficiency
 Internal discharge path in off state for BUCs and LDOs
 Power channels:
 Ch1: Synchronous buck converter, 4A max
 Ch2: Synchronous buck converter, 4A max
 Ch3: Synchronous buck converter, 2.5A max
 Ch4: Synchronous buck converter, 2.5A max
 Ch5: Synchronous boost converter, 2.5A max
 Ch6 7, Ch9 and Ch11: LDOs, 150mA max
 Ch8: Low noise, high PSRR LDO ,100mA max
 Ch10, 12,14: LDOs, 300mA max
 Ch13: LDO, 400mA max
 Ch15: Low Rdson switch,0.15ohm Vgs=3V
 Ch16: HDMI5V switch 80mA max
 Ch17 OTG switch 800mA max
 Fixed and programmable power up/down sequences
 Package: 7mmx7mm QFN68