Features
Power up to 3 stepper motors of NEMA 17, 23, or 24
Sophisticated stepper motor control based on the latest DSP technology
Built-in breakout board and I/O’s
Step & direction Control
200 kHz maximum frequency for each axis
20 - 60 VDC operating voltage
1.45 - 6.0A (1.41—6.0A) output current per axis
8 micro step settings: 1, 1/2, 1/4, 1/8, 1/10, 1/16, 1/32, 1/64
8 output current settings: 1.41, 2.12, 2.83, 3.54, 3.96, 4.24, 4.95, 6.0 A (version1.1b, it’s the latest and default version for future), corresponding RMS current settings: 1.0, 1.5, 2.0, 2.5, 2.8, 3.0, 3.5, 4.25A
8 output current settings: 1.45, 2.08, 2.72, 3.37, 4.05, 4.72, 5.35, 6.0 A (for previous version1.0a)
Damping and anti-resonance for extra smooth motor movement
Allowing individual output current & micro step configurations for each axis
Input pulse smoothing for less jittering, higher torque, and quicker response
Extra low motor heating & noise
Simple micro step & output current configuration via DIP switches
Fault output
Compact size and easy setup
50% automatic idle current reduction