Features
* User-programmable with PLUS+1 GUIDE
(Graphical User Integrated Development
Environment)
* 24 pins: (2) individually keyed Deutsch® DTM
12 pin connectors
* ARM 32 bit Cortex-M3 running at 120 MHz
– 12 bit analog-to-digital converter
– 16 bit timers/counters
* FRAM non-volatile memory
* 8 inputs
– (5) universal (DIN/AIN/FreqIN) that are
user-defined as either:
Analog: with configurable ranges
0 to 5.25 Vdc (with over range protection)
or 0 to 36 Vdc;
Digital: pull up (5 Vdc), pull down (0 Vdc) or
pull to center (2.5 Vdc);
Frequency (timing): 1 Hz to 10 kHz
– (2) digital (DIN) configurable as pull up
(5 Vdc), pull down (0 Vdc)
– (1) fixed range analog (AIN/CAN shield)
0 to 5.25 Vdc or CAN shield pin
* 8 outputs
– (8) universal (PWMOUT/DOUT/PVGOUT)
that are user-defined as either:
Digital: (3 A), configurable as source or
sink;
PWM: (30 to 4000 Hz), configurable as
open or closed loop with current control;
Analog voltage: open loop PWM at 4000 Hz
– Any PWMOUT/DOUT/PVGOUT can be used
to provide reference power to one PVG
valve
* 9 to 36 Vdc power supply, monitored internally
* 1 CAN 2.0 B port, the fixed range analog input
can be configured as the shield pin
* Power supply for external sensors rated at
5 Vdc to 200 mA and regulated internally
* 2 LEDs under user control
* 3 mounting alternatives: stack, end, or side
* MC024-122 contains application key required
to run Danfoss developed machine control
application software
* CE compliant