Features
■For T-groove cylinders without mounting
accessories
■Optional accessories for mounting on other
cylindrical housings.
■One-hand mounting possible
■Fine adjustment tool and stopper directly
mountable on the sensor.
■WeldGuard coated sensor housing
■Cable protected by silicone hose up to 200
mm in front of the connector
■DC 3-wire, 10…30 VDC
■NO contact, PNP output
■Pigtail with male end, M12 x 1
Functional principle
Magnetic field sensors are activated by
magnetic fields and are especially suited
for piston position detection in pneumatic
cylinders. Based on the fact that magnetic
fields can permeate non-magnetizable metals,
it is possible to detect a permanent magnet
attached to the piston through the aluminium
wall of the cylinder.