The 2-channel IM12-22EX-R isolating switching amplifier is equipped with intrinsically safe
input circuits.
Sensors according to EN 60947-5-6 (NAMUR)
or potential-free contact transmitters can be
connected to the device.
The output circuits feature 2 relays, each with
1 NO contact.

You can toggle between working or closed
current, resp. NO or NC mode via three
switches at the front. The switching state of
channel 1 is thereby transmitted to the outputs
1 and 2.
The Pwr LED lights green to indicate operational readiness. LED 1 lights yellow to indicate the switching status of the output.

■ 2 relay outputs (NO)
■ Output mode adjustable (NO/NC mode)
■ Multiplexing of signals possible
■ Complete galvanic isolation
■ Input reverse-polarity protected
■ ATEX, IECEx, cUL, cFM, CSA, TR CU,
NEPSI, KOSHA, TIIS, CCOE, INMETRO
■ Installation in zone 2