USE OF CABLE
as fieldbus cable for PROFIBUS (Process Field BUS) systems, for fixed
installation & limited flexible applications.
These cables are suitable for PROFIBUS DP (Decentralized Peripherals)
and PROFIBUS FMS (Fieldbus Message Specification) and also for FIP
(Factory Instrumentation Protocol) applications.
Standard acc. to Profibus-Spec.: EN61158 & EN61784 (DIN19245 T3 &
EN50170)
SPECIAL FEATURES
largely resistant to grease, coolant fluids and lubricants
oil-resistant: PUR & PVC acc.to DIN EN 60811-2-1 (PVC only mineral
oil)
Marine MUD acc.to NEK 606 (drilling mud)
UV-resistant: PUR; FEP; PVC & PE black; CMG & CMX types
optimized EMC compliant shielding max. cable lengths for a bus segment acc.to PI at stated transmission
rate:
PROFIBUS DP: 93,75kbit/s-max.1,2km | 187,5kbit/s-max.1km |
0,5Mbit/s-max.400m
1,5 Mbit/s-max.200m | 12,0 Mbit/s-max.100m
FIP : 2,5 Mbit/s-max. 200m
REMARKS
conform to RoHS // conform to DESINA (violet)
LABS-/silicone-free (during production)
conform to 2014/35/EU-Guideline ("Low-Voltage Directive") CE
FRNC: Flame Retardant Non Corrosive, halogen free
FC-Type = 'fast-connect' construction // PI = Profibus & Profinet
International