DESCRIPTION
Dynex offers a range of standard clamps designed to
accommodate press pack semiconductors with tie rod
centres from 75mm to 210mm and clamping force
from 5kN to 138kN.
The set clamps use Disc Springs to DIN 2092/2093 to
apply the clamping force over a wide temperature
range. The clamps also incorporate pressure
indicators to make installation simple. Isolation is
provided by high quality ceramic insulators and PTFE
sleeving.
Zinc plating with a Yellow Passivated finish is used for
enhanced corrosion protection.
If a clamp you require is not available in our standard
range, Dynex can provide a clamping solution to your
individual needs. Speak to your local sales
representative for details.

ORDERING INFORMATION
Example Part Number:
DC210/120/200/R