Description
The XGS family was designed for industrial and ITS applications
but is also used in applications that benefit from compact, global
shutter sensing. The higher resolution variants, featuring a larger
optical format, are specifically targeted at applications where larger
fields of view in combination with an excellent optical resolution are
required such as flat panel display inspection, aerial surveillance and
printed circuit board inspection. XGS is a truly hardware scalable
solution with a universal data, control and optical interface where parts
only differ in resolution and frame rate. The family has been specified
for compatibility with popular machine vision cameras and is ready to
take maximum advantage from upcoming camera interface standards
like USB 3.2, Thunderbolt (rev. 3) and 10 GigE and 4x CoaXPress6.
For ITS, it brings a next step in low light imaging and an interesting
range of resolutions.
Within the XGS family the image is read out through a column ADC
architecture and then transferred over a HiSPi digital interface. The
sensors can be configured to use from 48 to 12 data channels. The
on−chip digital logic, programmable via the serial interface, generates
all internal timing for integration control and supports all read out
modes.
Advanced trigger functions enable synchronization to external
events (Master and Slave Triggered) but also allow the camera to
synchronize the image read out with the host (receiver) on a frame or
line basis (Slave Frame Read and Slave Line Read).
The image can be read out by up to 64 independent ROIs; a unique
identifier will enable the host to detect the active ROI configuration
during the transfer over the HiSPi interface.
Up to three different register configurations sets (contexts) can be
programmed and also sequentially enabled (frame by Frame) with a
single command over the control interface.
Various operating modes enable a flexible sensor operation to meet
application specific requirements such as reduced read out data rate,
implemented by HiSPi channel multiplexing (48, 36, 24, & 12
channels), reduced power consumption by going to an idle mode while
waiting for an external trigger.
The XGS 45000 sensor adds to the XGS family and has the same pin
functionality, optical performance, and sequencer as the rest of the
XGS family of sensor
Features
 On−chip 12−bit Column ADCs
 10−bit Mode with Increased Frame Rate of
52 fps (48−lane) at Full Resolution
 Companding & 10−Bit Mode at 37 fps
(24−lane) and 19 fps (12−lane)
 Dual Gain Mode with 74.5 dB Dynamic
Range (TJ = 40C) at Half Frame Rate
 Data Interface: 48−lane HiSPi (Scalable
Low−Voltage Signaling)
 Configurable Number of HiSPi Lanes: 48,
36, 24 or 12
 Two−Wire (I2C) and Four−Wire (SPI)
Serial Interface
 Triggered Integration and Readout Control
 Programmable Control for up to 64
Regions of Interest (ROI)
 Context Switching
 These Devices are Pb−Free, Halogen
Free/BFR Free and are RoHS Compliant
Applications
 Machine Vision
 Security
 Intelligent Transportation Systems (ITS)
 Broadcasting (8192 by 4320 @60 fps)
 Medical
 Scientific