APPLICATION
Product developers looking to quickly analyze and debug Qi wireless
transmitter system operation, firmware operation, and error handling.
The Receiver Simulator provides a variety of tests for assessing transmitter
performance. It is useful for debugging, product demonstrations, Qi precompliance test, production test, and as a general purpose Qi receiver.

FEATURES
• Stand alone, easy to use device in rugged enclosure
• Regulated +5VDC output
• Selectable comm. tests and modulators
• LEDs for device status
• Test points for bridge voltage and digital comm. data
• Selectable internal loads up to 2.0W in 0.25W increments
• Screw terminals for connecting external loads up to 5 0W
• Available in two models for WPC V1.0 or WPC V1.1 compatibility
• RxSim V1.1 is factory calibrated for more accurate received power
measurements. Over reports power by +200 mW (within WPC spec)
• RxSim V1.1 reports proprietary 16 bit high resolution received power
values in addition to the WPC required 8-bit packets

TEST MODES
• Standard Qi compatible receiver
• No comm. packets
• Invalid comm. data bit rates
• Invalid comm. packet checksum
• Invalid packet order
• Invalid WPC spec version
• Undefined comm. packets
• Multiple power control hold-off packets
• Error packets at minimum intervals
• Repeated negative error packets
• EPT packets with reason codes
• Invalid packet timing
• No rectified (V1.0) or received (V1.1) power packets

MODULATORS AND LOADS
• Selectable AC capacitive, AC resistive, and DC resistive modulators
• Selectable 0.0W to 2.0W internal loads in 0.25W steps
• External loads up to 5.0W can be connected (internal load disabled)