DISCRIPTION
This non-mercury sensor has been designed to detect movement or vibration.
The sensor will react when disturbed by giving a fleeting change of state (ie
normally open to normally closed or vice versa). The time taken to settle depends
on the amount of energy absorbed by the sensor; the settled state will
normally be closed. The sensors contacts, when undisturbed, are normally
closed, however it is possible to mount the switch with contacts open therefore
we recommend that applications look for change of state not contact
open or closed. This product offers additional sensitivity adjustment via an
internal potentiometer. The output is referenced to 0V and can drive a transistor
or similar device.

FEATURES
• Resistant to Severe Environmental Conditions
• Case Material: ABS Plastic
• Wire: 3 x Round 0.142 PVC Covered and Insulated
(Brown: 5V, Green: 0V, White: O/P)