DESCRIPTION
The MPQ4210 is a synchronous, four-switch, buck-boost controller capable of regulating different output voltages with a wide input voltage range and high efficiency. It provides an I2C interface, which supports VOUT voltage programmability, VOUT slew-rate control, and output constant current limit programmability, making the MPQ4210 suitable for USB power delivery (PD) design in USB Type-C power supplies.
The MPQ4210 uses valley current control in buck mode and peak current control in boost mode, providing fast load transient response and smooth buck-boost mode transient. The MPQ4210 provides forced continuous conduction mode (FCCM) and a programmable average current limit, which supports flexible designs for different applications.
It also features programmable over-current protection (OCP) mode, programmable overvoltage protection (OVP) mode, and programmable VIN UVLO hysteresis.
The MPQ4210 is available in a QFN-27 (5mmx5mm) package.

FEATURES
 6V to 40V Start-Up Input Voltage Range
 5V to 40V Operation Input Voltage Range
 Flexible I2C Interface Control for:
o 0.5V to 28V Output Voltage Range
o 0.3V to 2.047V Reference Voltage Range with 1mV Step
o Selectable VOUT Slew Rate
o Programmable Constant Current Limit
 Output Current Monitor Function (IMON)
 Programmable Soft-Start Time
 Switching Frequency Spread Spectrum for EMI Optimization
 Integrated VOUT Discharge Function
 Selectable 200kHz, 300kHz, 400kHz, and 600kHz Switching Frequency
 Forced CCM Operation Mode
 Programmable VIN UVLO Hysteresis
 OCP, SCP, and OVP
 Interrupt Indicator for OCP, OVP, and PNG
 Available in a QFN-27 (5mmx5mm) Package with Wettable Flank
 AEC-Q100 Qualified

APPLICATIONS
 USB Power Delivery
 Industrial PC Power Supplies
 Super-Capacitor Charging