1FEATURES
2• Single-Ended Input
• Internal Sample-and-Hold Function
• Low Voltage (Single +3V) Operation
• Small Package
• Power-Down Feature

KEY SPECIFICATIONS
• Resolution 8 Bits
• Maximum sampling frequency 200 Msps (min)
• DNL ±0.4 LSB (typ)
• ENOB (f IN = 50 MHz) 7.3 bits (typ)
• THD (fIN = 50 MHz) 61 dB (typ)
• Power Consumption
– Operating 1.05 mW/Msps (typ)
– Power Down 1 mW (typ)

APPLICATIONS
• Flat Panel Displays
• Projection Systems
• Set-Top Boxes
• Battery-Powered Instruments
• Communications
• Medical Imaging
• Astronomy

DESCRIPTION
The ADC08200 is a low-power, 8-bit, monolithic
analog-to-digital converter with an on-chip track-and-
hold circuit. Optimized for low cost, low power, small
size and ease of use, this product operates at
conversion rates up to 230 Msps while consuming
just 1.05 mW per MHz of clock frequency, or 210 mW at 200 Msps. Raising the PD pin puts the ADC08200
into a Power Down mode where it consumes about 1
mW.
The unique architecture achieves 7.3 Effective Bits
with 50 MHz input frequency. The ADC08200 is
resistant to latch-up and the outputs are short-circuit
proof. The top and bottom of the ADC08200's
reference ladder are available for connections,
enabling a wide range of input possibilities. The
digital outputs are TTL/CMOS compatible with a
separate output power supply pin to support
interfacing with 3V or 2.5V logic. The digital inputs
CLK and PD) are TTL/CMOS compatible. The output
data format is straight binary.
The ADC08200 is offered in a 24-lead TSSOP
package and, while specified over the industrial
temperature range of −40°C to +85°C, it will function
over the to −40°C to +105°C temperature range.