1 Features
1• Total Power Output (Bridge-Tied Load)
– 2 × 125 W at 10% THD+N Into 4 Ω
– 2 × 100 W at 10% THD+N Into 6 Ω
• Total Power Output (Single-Ended)
– 4 × 45 W at 10% THD+N Into 3 Ω
– 4 × 35 W at 10% THD+N Into 4 Ω
• Total Power Output (Parallel Mode)
– 1 × 250 W at 10% THD+N Into 2 Ω
– 1 × 195 W at 10% THD+N Into 3 Ω
• >110 dB SNR (A-Weighted With TAS5518
Modulator)
• <0.1% THD+N (1 W, 1 kHz)
• Supports PWM Frame Rates of 192 kHz to
432 kHz
• Resistor-Programmable Current Limit
• Integrated Self-Protection Circuitry, Including:
– Undervoltage Protection
– Overtemperature Warning and Error
– Overload Protection
– Short-Circuit Protection
– PWM Activity Detector
• Stand-Alone Protection Recovery
• Power-On-Reset (POR) to Eliminate System
Power-Supply Sequencing
• High-Efficiency Power Stage (>90%) With 80-mΩ
Output MOSFETs
• Thermally Enhanced 44-Pin HTSSOP Package
(DDV)
• Error Reporting, 3.3-V and 5-V Compliant
• EMI Compliant When Used With Recommended
System Design

2 Applications
• Mini and Micro Audio Systems
• DVD Receivers
• Home Theaters

3 Description
The TAS5352A device is a high-performance,
integrated stereo digital amplifier power stage
designed to drive a 4-Ω bridge-tied load (BTL) at up
to 125 W per channel with low harmonic distortion,
low integrated noise, and low idle current.
The TAS5352A has a complete protection system
integrated on-chip, safeguarding the device against a
wide range of fault conditions that could damage the
system. These protection features are short-circuit
protection, overcurrent protection, undervoltage
protection, overtemperature protection, and a loss of
PWM signal (PWM activity detector).
A power-on-reset (POR) circuit is used to eliminate
power-supply sequencing that is required for most
power-stage designs.