Ultrafast Operation . . . 7.6 ns (Typ)
Low Positive Supply Current
10.6 mA (Typ)
Operates From a Single 5-V Supply or From
a Split ±5-V Supply
Complementary Outputs
Low Offset Voltage
No Minimum Slew Rate Requirement
Output Latch Capability
Functional Replacement to the LT1016

description
The TL3016 is an ultrafast comparator designed
to interface directly to TTL logic while operating
from either a single 5-V power supply or dual
±5-V supplies. It features extremely tight offset
voltage and high gain for precision applications. It
has complementary outputs that can be latched
using the LATCH ENABLE terminal. Figure 1
shows the positive supply current of this
comparator. The TL3016 only requires 10.6 mA
(typical) to achieve a propagation delay of 7.6 ns.
The TL3016 is a pin-for-pin functional replacement
for the LT1016 comparator, offering higher
speed operation but consuming half the power.