FEATURES
 1:9 LVCMOS output fanout buffer for DC to 150MHz
 8mA Output Drive Strength
 Low power consumption for portable applications
 Low input-output delay
 Output-Output skew less than 250ps
 Low Additive Phase Jitter of 60fs RMS
 2.5V to 3.3V, ±10% operation
 1.8V ± 10% operation up to 67MHz
 Operating temperature range from -40°C to 85°C
 Available in 16-Pin QFN GREEN/RoHS package
DESCRIPTION
The PL133-97 is an advanced fanout buffer design for
high performance, low-power, small form factor applications.
The PL133-97 accepts a reference clock input from
DC to 150MHz and provides 6 outputs of the same frequency.
The PL133-97 is offered in a QFN-16L 3x3mm package
and it offers the best phase noise, additive jitter performance,
and lowest power consumption of any comparable
IC.
The PL133-97 outputs can be disabled to a high impedance
(tri-state) by pulling low the OE pin. When the OE pin
is high, the outputs are enabled and follow the REF input
signal. When the OE pin is left open, a pull-up resistor on
the chip will default the OE pin to logic 1 so the outputs are
enabled.
CLK8 is a free running output that remains enabled
when the OE pin is pulled low.