1 Features
1• High-Voltage DC/DC Boost Converter with
Integrated FET with Four Switching Frequency
Options: 156/312/625/1250 kHz
• 2.7-V to 22-V Input Voltage Range to Support
1x…5x cell Li-Ion Batteries
• Programmable PWM Resolution
– 8 to 13 True Bit (Steady State)
– Additional 1 to 3 Bits Using Dithering During
Brightness Changes
• I2C-Compatible and PWM Brightness Control
• Automatic PWM & Current Dimming for Improved
Efficiency
• PWM Output Frequency and LED Current set
through Resistors
• Optional Synchronization to Display VSYNC Signal
• 6 LED Outputs with LED Fault (Short/Open)
Detection
• Low Input Voltage, Over-temperature, Overcurrent
Detection, and Shutdown
• Minimum Number of External Components

2 Applications
• Notebook and Netbook LCD Display LED
Backlight
• LED Lighting

3 Description
The LP8552 is a white LED driver with integrated
boost converter. It has six adjustable current sinks
which can be controlled by PWM input or with I2C- compatible serial interface. The boost converter has
adaptive output voltage control based on the LED
driver voltages. This feature minimizes the power
consumption by adjusting the voltage to lowest
sufficient level in all conditions.
LED outputs have 8-bit current resolution and up to
13-bit PWM resolution with additional 1-3 bit dithering
to achieve smooth and precise brightness control. Proprietary Phase Shift PWM control is used for LED
outputs to reduce peak current from the boost
converter, thus making the boost capacitors smaller.
The Phase Shifting scheme also eliminates audible
noise.
Automatic PWM dimming at lower brightness values
and current dimming at higher brightness values can
be used to improve the optical efficiency. Internal EEPROM is used for storing the configuration data.
This makes it possible to have minimum external
component count and make the solution very small.
The LP8552 has safety features which make it
possible to detect LED outputs with open or short
fault. As well low input voltage and boost overcurrent
conditions are monitored and chip is turned off in
case of these events. Thermal de-rating function
prevents overheating of the device by reducing
backlight brightness when set temperature has been
reached.