Features
■ Three half bridges for 0.75 A loads
(RDSon = 1600 mΩ)
■ Two configurable high-side driver for up to 1.5A
load (RDSon = 500mΩ) or 0.35 A load
(Ron = 1800 mΩ)
■ One high-side driver for 6 A load
(RDSon = 100 mΩ)
■ Programmable soft start function to drive loads
with higher inrush currents (i.e. current > 6 A,
current > 1.5 A)
■ Very low current consumption in standby mode
(IS < 6 μA typ; Tj ≤ 85 °C)
■ All outputs short circuit protected
■ Current monitor output for high-side OUT1,
OUT4, OUT5 and OUT6
■ All outputs over temperature protected
■ Open-load diagnostic for all outputs
■ Overload diagnostic for all outputs
■ PWM control of all outputs
■ Charge pump output for reverse polarity
protection

Applications
■ Door actuator driver with bridges for mirror axis
control and high-side driver for mirror defroster
and two 10 W light bulbs and/or LEDs.