1 Features
1• 15-W/ch into an 8-Ω Loads at 10% THD+N From
a 16-V Supply
• 10-W/ch into 8-Ω Loads at 10% THD+N From a
13-V Supply
• 30-W into a 4-Ω Mono Load at 10% THD+N From
a 16-V Supply
• 90% Efficient Class-D Operation Eliminates Need
for Heat Sinks
• Wide Supply Voltage Range Allows Operation
From 8 V to 26 V
• Filter-Free Operation
• SpeakerGuard™ Speaker Protection Includes
Adjustable Power Limiter Plus DC Protection
• Flow Through Pin Out Facilitates Easy Board
Layout
• Robust Pin-to-Pin Short Circuit Protection and
Thermal Protection With Auto Recovery Option
• Excellent THD+N / Pop-Free Performance
• Four Selectable, Fixed Gain Settings
• Differential Inputs

2 Applications
• Televisions
• Consumer Audio Equipment

3 Description
The TPA3110D2 is a 15-W (per channel) efficient,
Class-D audio power amplifier for driving bridged-tied
stereo speakers. Advanced EMI Suppression
Technology enables the use of inexpensive ferrite
bead filters at the outputs while meeting EMC
requirements. SpeakerGuard™ speaker protection
circuitry includes an adjustable power limiter and a
DC detection circuit. The adjustable power limiter
allows the user to set a "virtual" voltage rail lower
than the chip supply to limit the amount of current
through the speaker. The DC detect circuit measures
the frequency and amplitude of the PWM signal and
shuts off the output stage if the input capacitors are
damaged or shorts exist on the inputs.
The TPA3110D2 can drive stereo speakers as low as
4 Ω. The high efficiency of the TPA3110D2, 90%,
eliminates the need for an external heat sink when
playing music.
The outputs are also fully protected against shorts to
GND, VCC, and output-to-output. The short-circuit
protection and thermal protection includes an autorecovery
feature.