1 Features
1• VCC Operation at 3 V and 4.3 V
• 1.8-V Compatible Control-Pin Inputs
• IOFF Supports Partial Power-Down-Mode
Operation
• Ron = 10 Ω Maximum
• ΔR on <0.35 Ω Typical
• Cio(ON) = 7 pF Typical
• Low Power Consumption (1 μA Maximum)
• ESD Performance Tested Per JESD 22
– 6000-V Human Body Model (HBM)
(A114-B, Class II)
– 1000-V Charged-Device Model (C101)
– 250-V Machine Model (A115-A)
• –3-dB Bandwidth = 955 MHz Typical
• Packaged in 10-pin UQFN (1.4 mm × 1.8 mm)

2 Applications
• Routes Signals for USB 1.0, 1.1, and 2.0
• Mobile Industry Processor Interface (MIPI) Signal
Routing

3 Description
The TS3USB30 is a high-bandwidth switch specially
designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such
as cell phones, digital cameras, and notebooks with
hubs or controllers with limited USB I/Os. The wide
bandwidth (955 MHz) of this switch allows signals to
pass with minimum edge and phase distortion. The
device multiplexes differential outputs from a USB
host device to one of two corresponding outputs. The
switch is bidirectional and offers little or no
attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-
to-channel noise isolation, and is compatible with
various standards, such as high-speed USB 2.0 (480
Mbps).