1 Features
1• Compatible with USB 2.0, OTG 2.0 and BC 1.2
• Pin strap or I2C configurable
• Support for LS, FS, HS signaling
• Ultra-low USB Disconnect and Shutdown Power
Consumption
• Selectable Signal Gain Via Daisy Chain Device for
High Loss Applications
• D1P/M and D2P/M Interchangeable and
Host/Device Agnostic
• Supports up to 5m pre-channel or 2m postchannel
Cable Length
– Four Selectable AC Boost Settings Via
External Pulldown Resistor
– DC Boost Along With AC Boost for Best Signal
Integrity

2 Applications
• Notebooks
• Desktops
• Docking Stations
• Tablets
• Cell Phones
• Active Cable, Cable Extenders
• Backplane
• Televisions

3 Description
The TUSB212 is a USB High-Speed (HS) signal
conditioner, designed to compensate for ISI signal
loss in a transmission channel.
TUSB212 has a patent-pending design which is
agnostic to USB Low Speed (LS) and Full Speed
(FS) signals. LS and FS signal characteristics are
unaffected by the TUSB212 while HS signals are
compensated.
Programmable signal AC boost and DC boost permits
fine tuning device performance to optimize High
Speed signals at the connector. This helps to pass
USB High Speed electrical compliance tests.
In addition, TUSB212 is compatible with the USB On-
The-Go (OTG) and Battery Charging (BC) protocols.