DESCRIPTION
The MPQ2166B is an internally compensated, dual, pulse-width modulation (PWM), synchronous step-down regulator that operates from a 2.7V to 6V input voltage (VIN) and generates an output voltage (VOUT) as low as 0.6V. The MPQ2166B can be configured as a 2A/2A or 3A/1A output current (IOUT) regulator, and is ideal for a wide range of applications, including automotive infotainment, clusters, and telematics, as well as portable instruments.
The MPQ2166B integrates dual, 55mΩ, highside MOSFETs (HS-FETs) and 20mΩ synchronous rectifiers to achieve high efficiency without an external Schottky diode. The MPQ2166B offers peak current mode control and internal compensation, and is capable of low-dropout configurations. Both channels can operate at 100% duty cycle.
Full protection features include cycle-by-cycle current limiting and thermal shutdown.
The MPQ2166B requires a minimal number of readily available, standard external components, and is available in a QFN-18 (2.5mmx3.5mm) package.

FEATURES
• Cooler Thermals:
o Below 20°C Operating Junction Temperature (TJ) Rise at 2A/2A, 2.3MHz
o 90% Efficiency (5V to 1.8V, 2A, 2.3MHz)
o Low-Ohmic BCD FET Technology
• Low-Noise EMI and EMC:
o MeshConnectTM Flip-Chip Package
o Operates Outside of AM Radio Band
• Reduces Board Size and BOM:
o Integrated Compensation Network
o Available in a Small QFN-18 (2.5mmx3.5mm) Package
• Additional Features:
o Power Good (PG) Output
o External Soft Start (SS) and Tracking
o Over-Current Protection (OCP) with Hiccup Mode
o External Sync Clock
o 100% Duty Cycle Operation
o Available in AEC-Q100 Grade 1

APPLICATIONS
• Automotive Infotainment
• Automotive Clusters
• Automotive Telematics
• Battery-Powered Devices
• Portable Instruments