General Description
The TH8055 is a physical layer device for a single wire data link capable of operating with various CSMA/CR protocols such as the Bosch Controller Area Network (CAN) version 2.0. This serial data link network is intended for use in applications where high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor and/or dedicated logic devices which use the network.

Features and Benefits
❐ Fully compatible with J2411 Single Wire CAN specification for Class B in vehicle communications
❐ 30 µA typical power consumption in sleep mode independent from CAN voltage range
❐ Operating voltage range 5…18V
❐ Up to 100 kbps high-speed transmission mode
❐ Up to 40 kbps bus speed
❐ Selective BUS wakeup
❐ Low RFI due to output wave shaping
❐ Fully integrated receiver filter
❐ Bus terminals proof against short-circuits and transients in automotive environment
❐ Loss of ground protection
❐ Protection against load dump, jump start
❐ Thermal overload and short circuit protection
❐ ESD protection of 4 kV on CAN pin (2kV on any other pin)
❐ Undervoltage lock out
❐ Bus dominant timeout feature