General Description

The TH8082 is a physical layer device for a single wire data link capable of operating in applications where high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor which use the network. The TH8082 is designed in accordance to the physical layer definition of the LIN Protocol Specification, Rev. 1.3 and 2.0.The IC furthermore can be used in ISO9141 systems.

Features

  Compatible to LIN Physical Layer Specification Rev.1.3 and 2.0

  Compatible to ISO9141 functions

  Operating voltage VS = 7 to 18 V

  Very low standby current consumption of 6.5µA in sleep mode

  Remote wake up via bus traffic

  Baud rate up to 20 kBaud

  Control output for voltage regulator with low on – resistance for switchable master termination

  Low EME due to slew rate control

  High EMI immunity

  Fully integrated receiver filter

  Bus terminals proof against short-circuits and transients in the automotive environment

  High impedance Bus pin in case of loss of ground and undervoltage condition

  Bus short to ground protection

  Thermal overload protection

  Integrated termination resistor for LIN slave nodes

  High signal symmetry for using in RC – based slave nodes up to 2% clock tolerance

  ±4kV ESD protection