Features
 High Performance USB 3.0 or eSATA to SATA Storage Bridge Controller
 USB 3.0 Specification and USB 2.0 Specification Compliant
o USB-IF SuperSpeed Logo Certified (TID No. 340000010)
o SuperSpeed(5Gbps), Hi-Speed(480Mbps), and Full-Speed(12Mbps)
o USB Mass Storage Class Bulk-Only Transport
 Serial ATA Revision 3.0 Specification Compliant
o Embedded SATA PHY and Controller
o SATA Gen2i/Gen2m (3Gbps) and SATA Gen1i/Gen1m (1.5 Gbps)
o Supports SATA Hot Plug
o Supports SATA Port Multiplier
 Supports over 2-Terabytes and 4KB-sector Hard Drives
 Supports USB3.0/USB2.0/SATA Power Saving Management
 High Performance Embedded 8-bit Microcontroller
 Internal data buffer for downstream and upstream optimized data transfer performance
 Firmware update, Vendor/Product ID, and other related configuration information can be
programmed to external Serial EEPROM or SPI serial flash through USB interface.
 Generic SPI interface and I2C interface for ICP
 13 General Purpose IO (GPIO) pins can be defined for specific functions by external
configuration ROM or through USB interface. Also provides SDK for further applications.
 Supports two PWM interfaces
 Supports single 30-MHz reference clock
 Ultra-low power 1.2V core operating voltage by 0.13um process
 Inexpensive LQFP64 package