▪ Single 1.65 V - 1.95 V supply
▪ Serial Peripheral Interface (SPI) and Quad Peripheral Interface (QPI) compatible support
• Supports SPI Modes 0 and 3
• Supports SPI dual output operations (1-1-2)
• Supports Quad output operations (1-1-4)
• Supports Quad I/O / XiP operations (1-4-4, 0-4-4)
• Supports QPI I/O operations (4-4-4)
▪ Read Operations
• Fast Read up to 133 MHz with 30 pF load
• Clock-to-Output 7 ns
• Up to 266 Mb/s continuous data transfer rate (Dual I/O)
• Up to 532 Mb/s continuous data transfer rate (Quad I/O and QPI)
• XiP (eXecute in Place) operation: continuous read with 8/16/32/64-byte wrap
▪ Full Chip Erase
▪ Flexible Erase Architecture and Time
• 18 ms Typical 4-kByte Block Erase Time (Typical)
• 65 ms Typical 32-kByte Block Erase Time (Typical)
• 160 ms Typical 64-kByte Block Erase Time (Typical)
▪ Flexible Programming and Time
• Byte/Page Program (1 to 256 Bytes)
• Dual or Quad Input Byte/Page Program (1 to 256 Bytes)
▪ Erase/Program Suspend and Resume
▪ JEDEC Standard Manufacturer and Device ID
▪ Memory Protection Support
• User-Definable Protected Area at Start or End of Memory Array
• Enable/Disable Protection with WP Pin