The illuminated pushbuttons of series 51 with hoseproof front (IP 65)
can be supplied with snap-action or low-level switching elements. The
equipment (switches) for raised mounting are protected against
accidental operation by the extended sides of the bezel. Flush mounting
equipment excells with best available ergonomy and low down hight.
To supplement the range of illuminated pushbuttons, we can offer a
hoseproof safety keylock switch with various lock numbers.
Mounting
All switch actuators are mounted from the front by pushing them through
the mounting hole in the front panel. They are then fixed from the back
with a fixing nut and the mounting tool Typ-Nr. 01-907. Max. tightening
torque 50 Ncm.
For switching elements we offer plug-in bases, which when soldered to
a PCB enable a plug-in connection to the button. The rectangular
actuators for raised are provided with an anti-twisting device.