Dialight Optopipe Light Pipe Description
This Optopipe’s® light emitting surface appears bright and uniformly luminous. It is reliably held in the panel by 3 pressfit splines. This Optopipe® functions as a through-the-case indicator with a textured finish on its light-emitting surface that increases its viewing angle. The light source can be any super-bright 2mm, 3mm, or 5mm LED, or one of Dialight’s 597 Series SMT LEDs. The emitting surface of the light source should be located no more than 0.020" or 0.5mm from the Optopipe®. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index. Dialight can provide custom Optopipe® solutions for your applications.

Features
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Arrays reduce insertion costs
• Designed to replace 5mm right angle through-hole device
• Secures to Panel by press-fit