DESCRIPTION
The ST75C185 is ow power BICMOS device containing three independent drivers and five receivers that is used to interface data terminal equipment (DTE) with data circuit-terminating equipment (DCE).

■ MEETS STANDARD EIA-232-E
■ SINGLE CHIP WITH INTERFACE BETWEEN UART AND SERIAL PORT CONNECTOR
■ LESS THAN 20mW QUIESCENT POWER CONSUMPTION
■ WIDE DRIVER SUPPLY VOLTAGE: 7 TO 13.2V
■ DRIVER OUTPUT SLEW RATE LIMITED TO 30V/µs MAX
■ RECEIVER INTPUT HYSTERESIS: 1.1 TYP
■ PUSH-PULL RECEIVER OUTPUTS
■ ON CHIP RECEIVER 1µs NOISE FILTER
■ FUNCTIONALLY INTERCHANGEABLE WITH STM ST75185
■ ESD PROTECTION: ±10KV HUMAN BODY MODEL