INTRODUCTION
The ST72371/ST72372 HCMOS Microcontroller Units are members of the ST7 family. These devices are based on an industry standard 8-bit core and feature an enhanced instruction set. The processor runs with an external clock up to 24 MHz with a 5.5V supply. Under software control the ST72371/ST72372 can be placed in WAIT, SLOW or HALT modes thus reducing power consumption. The enhanced instruction set and addressing modes afford real programming potential.

■ User Program Memory (ROM/OTP/EPROM): 16K bytes
■ Data RAM: 512 bytes, including 256 bytes of stack
■ Master Reset and Power-On Reset
■ Run, Wait, Slow, Halt and RAM Retention modes
■ 23 to 32 I/O lines:
    – 4 to 5 programmable interrupt inputs
    – 6 to 8 high sink outputs
    – 4 to 8 analog alternate inputs
    – 10 to 14 alternate functions
    – EMI filtering
■ Programmable watchdog (WDG)
■ 16-bit Timer, featuring:
    – 2 Input Captures
    – 2 Output Compares (with 1 output pin)
    – PWM and Pulse Generator modes
■ 8-bit Analog-to-Digital converter (4 to 8 channels)
■ Four 10-bit and one 12-bit Digital to Analog Converter Channels with PWM output
■ Fast I2C Multimaster Interface
■ Serial Communications Interface (SCI) (ST72371N only)
■ 8-bit Data Manipulation
■ 63 Basic Instructions
■ 17 main Addressing Modes
■ 8 x 8 Unsigned Multiply Instruction
■ True Bit Manipulation
■ Complete Development Support on PC/DOS WINDOWSTM Real-Time Emulator
■ Full Software Package on DOS/WINDOWSTM (C-Compiler, Cross-Assembler, Debugger)