FEATURES
* Input Voltage: 90~265VAC
* Input Frequency: 47~63Hz
* Inrush Current: Does not exceed 30A at 115VAC input or 60A AC input, at cold start 25°C
* Load Range: When all outputs are at 60% rated load condition, the +5V output is set between 4.90~5.10V and all other outputs are within the specified voltage accuracy range
* Ripple And Noise: Peak to peak ripple and noise for each output is < 1% of each output voltage at rated load 115~230VAC
* Line Regulation: < +/-1% at rated load with +/-10% change in input voltage
* Load Regulation: The output voltage load regulation is less than the values on the table when each output loading changes +/-40% from 60% rated load while all other outputs at 60% rated load
* Hold Up Time: 14ms typ. from the last AC line charging pulse to the point when +5V drops down to +4.75V
* Output Power: Total DC continuous power is within 200W at 40oC ambient temperature. If the input voltage is < 100VAC, total DC continuous power should not exceed 180W
* Power Good Signal: Goes high 100~500ms after all DC output is ready
* Power Failure: Goes low 1ms before any DC output falls
* Efficiency: > 65% at nominal line and rated load
* Altitude: 10,000 feet
* Protection: Built-in crowbar circuit automatically shuts down outputs to avoid damaging external circuits. Trip point of O.V.P. circuit is between 5.7~7.0V
* Temperature: 0~+70°C (operating); -40~+75°C (storage)
* Humidity: 5~95%; non-condensing at 40oC (operating)
* Connectors:
    AC Input/Output: Meets IEC 320/CEE 22 standard
    Tab Terminals: Female 0.250" x 0.032"
    CPU Board: Alex 8500-06 or equivalent device 3.5" Disk Drive: AMP 1-480424-0/171822-4 or equivalent device
* Dimensions: 14.0 x 15.0 x 8.62 cm with +/-0.8mm and +/- 0.4mm tolerance between mounting holes
* MTBF: 156,598 hrs.