The DRF1300 is a push-pull hybrid containing two high power gate drivers and two power MOSFETs. It was designed to provide the system designer increased flexibility, higher performance, and lowered cost over a non-integrated solution. This low parasitic approach, coupled with the Schmitt trigger input, Kelvin signal ground, Anti-Ring function Invert and Non-invert select pin provide improved stability and control in Kilowatt to Multi-Kilowatt, High Frequency ISM applications. FEATURES • Switching Frequency: DC TO 30MHz • Inverting Non-Inverting Select • Low Pulse Width Distortion • Single Power Supply (Per Section) • 1V CMOS Schmitt Trigger Input 1V Hysteresis • Switching Speed 3-4ns • BVds = 500V • Ids = 30A max. Per-section • Rds(on) ≤ .24 Ohm • PD = 550W Per-section • RoHS Compliant TYPICAL APPLICATIONS • Class C, D and E RF Generators • Switch Mode Power Amplifiers • HV Pulse Generators • Ultrasound Transducer Drivers • Acoustic Optical Modulators
|