General Description

This series of devices are Flash Memory type 8-bit high performance RISC architecture microcontrollers. Offer ing users the convenience of Flash Memory multi-programming features, these devices also include a wide range of functions and features, among which is their internal DC-DC Converter allowing low voltage op eration. In addition to their Flash Program Memory there is also area of RAM Data Memory and an area of

EEPROM memory for storage of non-volatile data such as serial numbers, calibration data etc.

Features

MCU Features

Operating voltage: 3.0V (typ.)

Power down and wake-up functions to reduce power consumption

Five oscillators:

   -External High Speed Xtal

   -External 32.768kHz Xtal

   -External RC

   -Internal High Speed -- no ext. components

   -Internal 32kHz -- no ext. components

Multi-mode operation: NORMAL, SLOW, IDLE and SLEEP

Fully integrated internal 4MHz, 8MHz and 12MHz

All instructions executed in one or two instruction cycles

Table read instructions

63 powerful instructions

Up to 8 subroutine nesting levels

Bit manipulation instruction

Flash Program Memory: 1K14 ~ 2K15

RAM Data Memory: 648 ~ 968

EEPROM Memory: 648

Watchdog Timer function

Up to 8 bidirectional I/O lines

External interrupt line shared with I/O pin

Multiple Timer Module for time measure, input capture, compare match output, PWM output or single pulse output functions

Comparator function

Dual Time-Base functions for generation of fixed time interrupt signal

Low voltage reset function

Low voltage detect function

Multi-channel 12-bit resolution A/D converter

DC-DC converter Features

3.0V  2.5% output voltage

0.7V start-up voltage

Output current up to 100mA

High efficiency: 85% (typ.) at VOUT=3V