General Description
The MIC5164 is a dual regulator controller designed for high speed bus termination. It offers a simple, low-cost JEDEC-compliant solution for terminating high-speed, lowvoltage digital buses (i.e. DDR, DDR2, DDR3, SCSI, GTL, SSTL, HSTL, LV-TTL, Rambus, LV-PECL, LV-ECL, etc) with a Power Good (PG) signal.
The MIC5164 controls two external N-Channel MOSFETs to form two separate regulators. It operates by switching between either the high-side MOSFET or the low-side MOSFET depending on whether the current is being sourced to the load or sunk by the regulator.

Features
• Input voltage range: 1.35V to 6V
• Up to 7A VTT Current
• Tracking programmable output
• Power Good (PG) signal
• Wide bandwidth
• Logic controlled enable input
• Requires minimal external components
• DDR, DDR2, DDR3, memory termination
• −40°C < TJ < +125°C
• JEDEC-compliant bus termination for SCSI, GTL, SSTL, HSTL, LV-TTL, Rambus, LV-PECL, LV-ECL, etc
• Tiny MSOP-10 package

Applications
• Desktop computers
• Notebook computers
• Communication systems
• Video cards
• DDR/DDR2/DDR3 memory termination