INTRODUCTION
SHARP’S LH28F008SC FlashFile™ memory with SmartVoltage technology is a high-density, low-cost, nonvolatile, read/write storage solution for a wide range of applications. Its symmetrically-blocked architecture, flexible voltage and extended cycling provide for highly flexible component suitable for resident flash arrays, SIMMs and memory cards. Its enhanced suspend capabilities provide for an ideal solution for code and data storage applications. For secure code storage applications, such as networking, where code is either directly executed out of flash or downloaded to DRAM, the LH28F008SC offers three levels of protection: absolute protection with VPP at GND, selective hardware block locking, or flexible software block locking. These alternatives give designers ultimate control of their code security needs.

FEATURES
• High-Density Symmetrically-Blocked Architecture
   – Sixteen 64K Erasable Blocks
• High-Performance
   – 85 ns Read Access Time
• Enhanced Automated Suspend Options
   – Byte Write Suspend to Read
   – Block Erase Suspend to Byte Write
   – Block Erase Suspend to Read
• Enhanced Data Protection Features
   – Absolute Protection with VPP = GND
   – Flexible Block Locking
   – Block Erase/Byte Write Lockout during Power Transitions
• Extended Cycling Capability
   – 100,000 Block Erase Cycles
   – 1.6 Million Block Erase Cycles/Chip
• Low Power Management
   – Deep Power-Down Mode
   – Automatic Power Saving Mode Decreases ICC in Static Mode
• Automated Byte Write and Block Erase
   – Command User Interface
   – Status Register
• SmartVoltage Technology
   – 3.3 V or 5 V VCC
   – 3.3 V, 5 V, or 12 V VPP
• SRAM - Compatible Write Interface
• ETOX™ V Nonvolatile Flash Technology
• Industry - Standard Packaging
   – 42-Pin, .67 mm × 8 mm2 CSP Package
   – 40-Pin, 1.2 mm × 10 mm × 20 mm TSOP (Type I) Package
   – 44-Pin, 600-mil, SOP Package