GENERAL DESCRIPTION
SNAD02C is a low cost serial 10-bits ADC with 8 individual input channels. Each channel can be independently programmed to a digital or analog input mode. In the analog input mode, this single-ended channel accepts an analog input signal from 0 to VREF and converts the signal into 12-bit digital codes (with 10-bit accuracy guaranteed). In the digital input mode, the channel can be treated as digital input port and the logic level appears at the channel can be acquired. SNAD02C has a synchronous 3-wires serial interface. Through this interface, the host CPU can easily control SNAD02C.

FEATURES
♦ Single Supply: 2.7V ~ 5.25V
♦ Eight Analog/Digital Input Channels.
♦ Internal 1.17v Bandgap Reference for Battery Monitoring. (Channel 7)
♦ Low Power Consumption: typical operating current: 500uA @ 3V, Standby current <1uA.
♦ Up to 25kHz Conversion Rate.
♦ 12-bits ADC with 8-bit effective number of bits
♦ 3-Wire Serial Interface

APPLICATIONS
♦ Battery-Powered Systems
♦ Instrumentation
♦ Portable Data Logging
♦ Test Equipment
♦ Data Acquisition
♦ Process-Control Monitoring
♦ Digital Input Bus Extender