General Description
With its unique array of configurable blocks, PSoC® 5LP is a true system level solution providing microcontroller unit (MCU), memory, analog, and digital peripheral functions in a single chip. The CY8C54LP family offers a modern method of signal acquisition, signal processing, and control with high accuracy, high bandwidth, and high flexibility. Analog capability spans the range from thermocouples (near DC voltages) to ultrasonic signals. The CY8C54LP family can handle dozens of data acquisition channels and analog inputs on every general-purpose input/output (GPIO) pin. The CY8C54LP family is also a high-performance configurable digital system with some part numbers including interfaces such as USB, multi-master inter-integrated circuit (I2C), and controller area network (CAN). In addition to communication interfaces, the CY8C54LP family has an easy to configure logic array, flexible routing to all I/O pins, and a high-performance 32-bit ARM® Cortex™-M3 microprocessor core. You can easily create system-level designs using a rich library of prebuilt components and boolean primitives using PSoC® Creator™, a hierarchical schematic design entry tool. The CY8C54LP family provides unparalleled opportunities for analog and digital bill of materials integration while easily accommodating last minute design changes through simple firmware updates.

Features
■ 32-bit ARM Cortex-M3 CPU core
   □ DC to 67 MHz operation
   □ Flash program memory, up to 256 KB, 100,000 write cycles, 20-year retention, multiple security features
   □ Up to 32-KB flash error correcting code (ECC) or configuration storage
   □ Up to 64 KB SRAM
   □ 2-KB electrically erasable programmable read-only memory (EEPROM) memory, 1 M cycles, and 20 years retention
   □ 24-channel direct memory access (DMA) with multilayer AHB[1] bus access
      • Programmable chained descriptors and priorities
      • High bandwidth 32-bit transfer support
■ Low voltage, ultra low power
   □ Wide operating voltage range: 0.5 V to 5.5 V
   □ High efficiency boost regulator from 0.5 V input to 1.8 V to 5.0 V output
   □ 3.1 mA at 6 MHz
   □ Low power modes including:
      • 2-µA sleep mode with real time clock (RTC) and low-voltage detect (LVD) interrupt
      • 300-nA hibernate mode with RAM retention
■ Versatile I/O system
   □ 28 to 72 I/Os (62 GPIOs, 8 SIOs, 2 USBIOs[2])
   □ Any GPIO to any digital or analog peripheral routability
   □ LCD direct drive from any GPIO, up to 46x16 segments
   □ CapSense® support from any GPIO[3]
   □ 1.2 V to 5.5 V I/O interface voltages, up to 4 domains
   □ Maskable, independent IRQ on any pin or port
   □ Schmitt-trigger transistor-transistor logic (TTL) inputs
   □ All GPIOs configurable as open drain high/low, pull-up/pull-down, High-Z, or strong output
   □ Configurable GPIO pin state at power-on reset (POR)
   □ 25 mA sink on SIO
■ Digital peripherals
   □ 20 to 24 programmable logic device (PLD) based universal digital blocks (UDBs)
   □ Full CAN 2.0b 16 RX, 8 TX buffers[2]
   □ Full-Speed (FS) USB 2.0 12 Mbps using internal oscillator[2]
   □ Up to four 16-bit configurable timer, counter, and PWM blocks
   □ Library of standard peripherals
      • 8-, 16-, 24-, and 32-bit timers, counters, and PWMs
      • Serial peripheral interface (SPI), universal asynchronous transmitter receiver (UART), and I2C
      • 50Many others available in catalog
   □ Library of advanced peripherals
      • Cyclic redundancy check (CRC)
      • Pseudo random sequence (PRS) generator
      • Local interconnect network (LIN) bus 2.0
      • Quadrat]ure decoder
■ Analog peripherals (1.71 V ≤ VDDA ≤ 5.5 V)
   □ 1.024 V ± 0.1% internal voltage reference across –40 °C to +85 °C
   □ Successive approximation register (SAR) analog-to-digital converter (ADC), 12-bit at 1 Msps
   □ Two 8-bit 8 Msps current digital-to-analog converters (DAC) (IDACs) or 1 Msps voltage DACs (VDACs)
   □ Four comparators with 95-ns response time
   □ Two uncommitted opamps with 25-mA drive capability
   □ Two configurable multifunction analog blocks. Example configurations are programmable gain amplifier (PGA), transimpedance amplifier (TIA), mixer, and sample and hold
   □ CapSense support
■ Programming, debug, and trace
   □ JTAG (4-wire), serial wire debug (SWD) (2-wire), single-wire viewer (SWV), and TRACEPORT interfaces
   □ Cortex-M3 flash patch and breakpoint (FPB) block
   □ Cortex-M3 Embedded Trace Macrocell™ (ETM™) generates an instruction trace stream.
   □ Cortex-M3 data watchpoint and trace (DWT) generates data trace information
   □ Cortex-M3 instrumentation trace macrocell (ITM) can be used for printf-style debugging
   □ DWT, ETM, and ITM blocks communicate with off-chip debug and trace systems via the SWV or TRACEPORT
   □ Bootloader programming supportable through I2C, SPI, UART, USB, and other interfaces
■ Precision, programmable clocking
   □ 3- to 62-MHz internal oscillator over full temperature and voltage range
   □ 4- to 25-MHz crystal oscillator for crystal PPM accuracy
   □ Internal PLL clock generation up to 67 MHz
   □ 32.768-kHz watch crystal oscillator
   □ Low power internal oscillator at 1, 33, and 100 kHz
■ Temperature and packaging
   □ -40°C to +85°C degrees industrial temperature
   □ 68-pin QFN and 100-pin TQFP package options